STEP 1 - Ordering
Choose the Plans, Digital or Physical.
OSR will send you the digital plans normally within 24 hours. The digital plans are released using google drive, this process is 100% manual, so a little patience is sometimes required :-). It helps the process if you have a gmail account, but this is not essential.
If you choose paper version these have a 10 day lead time.
STEP 2 - Wood Selection
We suggest using 5/8" or 3/4" MDF because it's easy to cut & paint Furniture grade plywood can also be used but note that the edge is hard to finish.
- One 4' * 8' sheet of 5/8" MDF
- Three pieces of 3" * 2" * 8' pine or similar construction lumber
- One piece of 1" * 1" * 8' pine or similar construction lumber
- Wood Glue
- Wood screws 1 3/4" long
STEP 3 - Joining Panels
When using MDF, you should NOT attempt to screw into the edge because it will split & will not be very strong.
We suggest screwing 1" pine strips to the edge and screw the side plates into the cross plates using the 1" pine strips.
STEP 4 - Assembling & Cutting
Once all the OSR Plans, Custom Hardware and Shopping List parts have arrived you are ready for assembly. Follow the OSR Plans.
Use your 1:1 scale paper plans on the wood and cut with a jigsaw.
Wood Working Tools
- Jig saw
- Circular saw
- Table saw
The assembly process is very straight forward, but you require basic wood working skills. Sorry, we do not provide a step by step assembly guide, we assume you have the required wood working skills for making a simple wood structure.
We supply full scale drawings, full scale layout drawing and full scale print drawing 3' wide so you can print locally.
STEP 5 - Hardware
Mount chosen wheels, pedals, monitors, seat, and hardware (not provided).
Prices shown in CDN Dollars
The plans are copyrighted and licensed for personal use only. The completed or partially completed sim rigs chassis is not permitted to be sold, resold, distributed, mass produced or used in any commercial fashion. The plans may not be reproduced or distributed in any manner.