After 5 years our Super sport F1 seat has been updated so it is more adjustable and can use the very popular & inexpensive Ikea Poang chair.
We used the ergonomic layout of a real F1 car to produce a authentic race position.
The design is simple to build with no complex joints and very cost effective solution for Sim Racers who enjoy DIY.
One sheet of 3/4" (19mm) MDF
55 linear feet (17m) of 2" * 1" (50mm * 25mm) of beach or maple or pine, etc.
Adjustable pedal angle, height & back forth
Adjustable wheel angle, height & back forth
- Optional shifter, keyboard & flight control mounts
STEP 1 - Ordering
Choose the Plans, Digital or Physical.
OSR will send you the digital plans normally within 24 hours. The digital plans are released using google drive, this process is 100% manual, so a little patience is sometimes required :-). It helps the process if you have a gmail account, but this is not essential.
If you choose paper version these have a 10 day lead time.
STEP 2 - Assembling & Cutting
We suggest you use 1:1 scale paper plans and lay on wood to cut with a jigsaw.
Wood Working Tools
Minimum recommended required
- Jig saw
- Chop saw
- Table saw
The assembly process is very straight forward, but you require basic wood working skills. Sorry, we do not provide a step by step assembly guide, we assume you have basic wood working skills.
The plans are copyrighted and licensed for personal use only. The completed or partially completed sim rigs chassis is not permitted to be sold, resold, distributed, mass produced or used in any commercial fashion. The plans may not be reproduced or distributed in any manner.