Mounting a flight controls to a wooden sim rig is often an issue, so I have designed a strong & simple solution that can be adapted to a wide range of sim rigs.
STEP 1 - Ordering
OSR will send you the digital plans normally within 24 hours. The digital plans are released using google drive, this process is 100% manual, so a little patience is sometimes required :-). It helps the process if you have a gmail account, but this is not essential.
STEP 2 - Assembling & Cutting
Once all the OSR Plans, Custom Hardware and Shopping List parts have arrived you are ready for assembly. Follow the OSR Plans.
OSR can provide a 1:1 scale paper plans to lay on wood to cut and jigsaw or router out the wood.
The rest of the assembly process is very straight forward, just follow the plans!
The plans are copyrighted and licensed for personal use only. The completed or partially completed sim rigs chassis is not permitted to be sold, resold, distributed, mass produced or used in any commercial fashion. The plans may not be reproduced or distributed in any manner.