We used the ergonomic layout of a real F1 car to produce an authentic race position. We understand that drivers come in every shape & size and each with an opinion on what the ideal driving position should be, so we have built in a very wide range of adjustment into the design
- One sheet 4' * 8' *3/4" MDF, (120cm * 240cm * 19mm) Approx $25cdn MDF. The nested area of all the sheet parts is 74" * 36". (188cm * 91cm)
- 2" * 3" construction pine, 20 ft Approx $12CDN
- Bolts & Screws
- Wheel height adjustment
- Wheel angle adjustment
- Wheel back/fourth adjustment
- Pedal height adjustment
- Pedal back/fourth adjustment
- Pedal angle adjustment
- Seat height adjustment
- Seat angle Adjustment
- Conventional race seat
- Ikea Poang chair (560mm wide) or Ikea Pello chair (555mm wide)
- Wood Slat seat made from 2" by 1" lumber
Optional plans available
- keyboard plans
- flight controls
Race wheel support
Our new OSR F1 seat provides lots flexibility for mounting a wide variety on wheels including direct wheels like OSW & Fanatec Podium, Accuforce, Fanatec, Logitech and Thrustmaster.
- Fanatec, Thustmaster, HE, Logitech
Simple to build
The design is simple to build with no complex joints and very cost effective solution for Sim Racers who enjoy DIY.
STEP 1 - Ordering
Choose the Plans, Digital or Physical.
OSR will send you the digital plans normally within 24 hours. The digital plans are released using google drive, this process is 100% manual, so a little patience is sometimes required :-). It helps the process if you have a gmail account, but this is not essential.
If you choose paper version these have a 10 day lead time.
STEP 2 - Assembling & Cutting
We suggest you use 1:1 scale paper plans and lay on wood to cut with a jigsaw.
Wood Working Tools
Minimum recommended required
- Jig saw
- Mitre/Chop saw
- Table saw
The assembly process is very straight forward, but you require basic wood working skills. Sorry, we do not provide a step by step assembly guide, we assume you have basic wood working skills.
The plans are copyrighted and licensed for personal use only. The completed or partially completed sim rigs chassis is not permitted to be sold, resold, distributed, mass produced or used in any commercial fashion. The plans may not be reproduced or distributed in any manner.