Estimated build cost based on 8020.net pricing combined with OSR custom plate
- Needs updating...
Custom CNC plates required
- This design uses a number of custom plates, so you need the CNC files if you want to cut the plates locally or OSR can provide a quote for cutting and powder coating the plates.
- We provide optional CNC files in DWG & DXF format
The CNC files, allow you to use your local laser or water jet cutting service, so you can have the files cut locally saving you shipping costs. Note you are only licensed to cut one set of plates for personal use.
Water jet cutting, produces a nice clean edge with a finish like medium grade sand paper, laser cutting can be more cost effective because it faster and produces a near mirror edge finish on steel or aluminium.
I suggest cutting the plates from 3mm (1/8") aluminium or low carbon steel, the monitor support arms should be cut from 6mm or 9mm.
STEP 1 - Ordering
OSR will send you the digital plans normally within 24 hours. The digital plans are released using google drive, this process is 100% manual, so a little patience is sometimes required :-). It helps the process if you have a gmail account, but this is not essential.
Choose the Plans option and decide if you want to purchase the standard hardware from OSR of another aluminum supplier.
OSR will send you the digital version of the plans right away and an 8020.net shopping list to complete the project. Shopping list items include:
- 15 OR 40 Series Aluminum Extrusion
- Bolts, Nuts, T-Nuts
- Universal Structural Pivot Nub
- 4 Hole and 2 Hole Inside Corner Brackets
We also offer ready to assembly kits including 8020 cut to length, so all you need to is the assembly.
Tnuts.com or 8020.net is the most common supplier for US customers but any aluminum extrusion supplier that supports the chosen aluminum extrusion size is valid.
STEP 2 - Assembling
Once all the OSR Plans, Custom Hardware and Shopping List parts have arrived you are ready for assembly. Follow the OSR Plans.
Depending on how you ordered the Aluminum Extrusion there might be some additional cutting to do if you ordered full lengths.
The rest of the assembly process is very straight forward, just follow the plans!
STEP 3 - Mounting
Mount chosen Monitors, Seat, and Hardware (not provided). Note can we supply wheel mounting plates if for all sim wheels upon request.
The plans are copyrighted and licensed for personal use only. The completed or partially completed sim rigs chassis is not permitted to be sold, resold, distributed, mass produced or used in any commercial fashion. The plans may not be reproduced or distributed in any manner.