Adjustable wheel mount for Fanatec Podium DD1 or DD2, to fit sim rig starting from 450mm wide between the support posts. By cutting the horizontal left to right support rails you can make this support almost any sim rig
The side plates have 20 degrees from horizontal and 150mm back & fourth adjustment.
We provide full scale PDF drawing for each part, optional CNC cutting files & 8020 cutting parts list.
- One front mounting plate 9mm (3/8") aluminium or 1/2" wood
- One Rear mounting plate 9mm (3/8") aluminium or 1/2" wood
- Four support plates 3mm (1/8") aluminium or steel or 3/8" wood
- Two side mount plates 3mm (1/8") aluminium or steel or 3/8" wood
- Two side adjustment plates 3mm (1/8") aluminium or steel or 3/8" wood
Available for 10, 15, 25, 40 & 45 Series
You supply
- CNC laser or water jet cutting services OR you cut DIY parts
- 8 socket cap or dome head head bolts, 30mm long
- 24 cap head bolts, 14mm long
- 24 Nuts
- 2 12mm by 30mm bolts
- 2 12mm nuts
- 2 12mm locking nuts
- 4 spacers 12mm thick